8 tips for building a patio

When starting a new DIY project, it’s essential to know what you’re doing and what you need. Building a patio has never been easier. Our number one secret is to call yourself a DIY guru!

Things necessary:

Before you start, you need to collect all the tools and consumables to make it possible!

• spade
• Garden hose or mason line and stake
• Plate compactor or tamper
• Landscape fabric
• Wheelbarrow
• Builder Sand
• Paver base (gravel / limestone)
• PVC pipe
• Paving stones / bricks / paving stones
• broom
• Polymer bonded sand
• 2×4 board

Top tip:

Mark all utility lines

Before you start anything, make sure your cables and lines aren’t filled. The last thing you want is to cut or rupture a pipe or cable-you will have an even bigger problem in your hands, and this will not allow you to DIY!

Outline your patio and remove all SOD

You need to get a good idea of ​​the shape and size of your new patio. To do this, use a stake and masonry line or place a garden hose on the ground.

If you don’t know the size, it’s a good idea to build a larger patio. It’s even harder to make it bigger when it’s done.

Use spades to remove dirt and grass from the area you want to build. Excavate a foundation about 22.86 cm deep and include the thickness of pavement, paving stones, or bricks.

If you are building a building near your house, tilt the patio away from your house.This applies if you are making a patio by your side garage In the same way.

Use the level to drop 2.54 cm every 1.22 m. Then use a tamper to compress all dirt. The remaining soil can be used around the compost and the base of the courtyard.

Add landscape fabric to the base

Next, the entire area should be lined with landscape fabric. You may need to cut it a little to make it fit better. This is done to prevent weeds from growing between the stones.

Build a base

Then add the pavement base to that area. This can be limestone or gravel. The depth of the layer should be about 15,24 cm. If you use limestone, use a garden hose to slightly wet the material. Use a tamper to harden the base.

If you choose gravel, you need to spread a thin layer of builder sand on it.

If you use limestone, you need to finish it with leveling sand. First, lay two PVC pipes over the entire length of the patio space. You may need to cut it to fit.

Spread the leveling sandwich on it. Then place the 2×4 on top of the pipe. Level, remove the pipe and fill the holes with sand.

Add paving stones or stones

Start with one side and start adding paving stones or paving stones. Keep making sure it is level and place the stones or paving stones close to each other.

Put the sand on

Once all paving stones or stones are beautifully placed, polymer bonded sand should be placed on top of them. Make sure all cracks are filled and use a broom to clear the sand.

A leaf blower can be used to remove excess sand and a hose can atomize the surface to submerge the sand in all cracks and spaces.

After construction, you need to add sand, sweep and water for about a week. This ensures that your patio is durable.

Install some patio edging

Once all paving stones or stones have been placed, a restraint or edging should be installed outside the patio. This keeps the paving stones in place and keeps the patio safe.

Keep it up

Now the fun begins. You can decorate your patio and add tables, chairs, or potted plants. If some stones start to wobble over time, you can add sand, sweeps, and water.

Clean all stones at the beginning and end of the summer or outdoor season. Clean using a scrub or pressure washer to prevent dirt and mold.

Final idea

Building a patio is fun and relatively easy. Use the tips to make sure your build is safe and level. Soon, you can show off your DIY project to your friends and enjoy Barbie and some drinks on the new patio!