The most important safety precautions to take before any DIY project
Doing your own home improvement projects and maintenance can be rewarding: In addition to saving money, there is a sense of accomplishment in completing tasks on your own. But the accident rate for DIYers can be higher than you think, so practice some basic safety precautions. Important if you are using power tools, ladders and blades. It’s easy to forget to use personal protective equipment when you’re in your own garage, but it can be critical to avoid serious injury. Here are some best practices when working from home.
ladder safety
Ladder safety is at the top of the list For injury prevention.Falling from a ladder can be painful at best and deadly at the worst case. always check Your ladder is the right size for the job you’re doing. If you can’t get the job done without stepping on the top two steps, the ladder isn’t high enough. Additionally, using a ladder that is not fully open so that the spreader bar is locked in place A ladder that moves while you are on it. Also, we do not recommend using the ladder on uneven ground as the ladder may swing back and forth..
Always maintain 3-point contact and keep your limbs and weight as close to the ladder frame as possible to avoid falling.more accidents.If using an extension ladder, every 4 feet you rise, The ladder leg is another foot away from the wall. This will give the ladder the proper angle to support your weight. Here are some more tips on how to: Make your ladder safer and easier to use.
eye protection
It’s a good idea to wear safety glasses while using power tools, but it’s easy to forget.Placing the pair in a conspicuous location near where the power tool is stored throws dust and particles into the air and as a result, put the power tool on before operating the tool which can get in your eyes. It’s a good way to remind yourself to My safety glasses are stamped with Z87 or Z87+. This label means that the American National Standards Institute has evaluated eye protection for use with the tool. Substandard eye protection can damage your glasses or render them ineffective in protecting your eyes.
G/O Media can earn commissions
gloves
Gloves should always be worn when working with materials that have sharp edges or splinters that nails or hardware may be protruding from. Metal cuts and punctures are notoriously difficult to clean. but, In addition to being unpleasant, they It can also cause infections. Rugged leather or synthetic puncture resistant gloves can reduce your chances of going to the emergency room.
Outdoor electrical and utility safety
If you’re doing a project outdoors, always call 811 before drilling to avoid accidentally interrupting buried utilities or drilling holes in septic tanks or underground oil tanks. Make sure you are well away from power lines. likewise. Most overhead lines require at least 10 feet of clearance, which is always good. Get further away from them.
P.Roper ventilation for dust and smoke
When working indoors, pay close attention to ventilation and dust collection. If you don’t have a suitable vacuum cleaner, use a dust mask and clean up the dust as you work. If you’re using chemicals to create smoke, you should do it outside or ventilate your indoor space as much as possible. Regular dust masks will not protect you from the fumes, so don’t rely on them in these cases. spray paint or lacquer thinner.
The most important safety precautions to take before any DIY project
Source link The most important safety precautions to take before any DIY project