How to clean the worst hard water stains from your toilet

After a long journey, I finally go home after a while and make a beeline for the bathroom and the familiar toilet. Instead of the gleaming white toilet you left behind, find a toilet full of brown lines and rings.This is (probably) because you live 85% of the United States There is hard water.

With your usual cleaner if you were only a short time away Quickly rotate the toilet brush to deal with new stains. But weeks (or months, Or years) will be much more stubborn.Here’s how to remove the toilet from the toilet bowl The worst hard water stain.

What is the cause of hard water stains on the toilet?

hard water Contains dissolved minerals Like calcium, magnesium and iron. When hard water dries on a faucet-like surface of a chrome sink, white white stains (technically mineral deposits) often remain.

The residue can also remain on the dry parts of the toilet bowl, but if the toilet is white, you probably won’t notice it.MeIt’s much harder to ignore brown and rusty rings and stains. This is usually Iron or manganese compounds To your water.

How to remove hard water stains from the toilet

Starting with Vinegar and baking sodaThen proceed to the other method.

Vinegar and baking soda

• Pour about 1 cup of white vinegar into the toilet On the dirt.
• Sprinkle 1 cup of baking soda on the dirt in the bowl, then sprinkle another cup of vinegar. Whisk for 10 to 15 minutes.
• Mix the vinegar / baking soda solution with the toilet brush and rub the bowl.
• Let it sit for about 30 minutes, then polish and rinse the bowl again. If any dirt remains, you can repeat this process.

Vinegar and borax (or salt)

This is best tried if you plan to go home all day or most of the time.

• make Borax (or salt) and white vinegar paste..
• Spread a thick coat on dirt and rings near the edge of the toilet bowl.
• The paste dries, so split it with vinegar all day long.
• After 8-10 hours, use a toilet brush to apply a final scrub to the entire bowl and rinse.

citric acid

Please do not use Citric acid to clean the toilet If your house has a septic tank. Otherwise, do the following:

• Remove water from the toilet bowl.
• Sprinkle water on the dry surface of the empty bowl and immediately sprinkle the citric acid powder on the stain.
• Leave it overnight.
• The next day, rub the bowl with a toilet brush.
• Rinse off with a rinse.

pumice

already taken Pumice stone or stick It is likely to remove the worst hard water stains on the toilet bowl and should be stored as a last resort, not a reliable method.that is Pumice stones can damage porcelain toilets, Do not try this method if you have any of these, as they will cause permanent damage to anything made of marble, laminate, plastic, or fiberglass.

If you have a porcelain toilet and have no other choice, check both pumice and dirty surfaces It’s completely wet. So Gently rub with a wet stone until there are no stains or rings.rinse It’s all off with the last flash.