Jannah Theme License is not validated, Go to the theme options page to validate the license, You need a single license for each domain name.
Tech

3 easy ways to make your own no-sew window treatments

Image from article titled 3 Easy Ways to Make Your Own No-Sew Window Treatments

Photo: Ekaterina Iachenko (shutter stock)

Dress up Your windows don’t look like they should break the bank, but blinds, shades, and curtains can get expensive quickly. simple and cheapwindow treatment in just a few hours of work.old blinds can be reused

Making your own window dressing means you can create something unique For a fraction of the cost of buying ready-made curtains and shades, you can actually get what you want.

how to make no-sew roman shades

You can make your own no-sew I repurposed an old blind set to make roman shades.If you have blinds that have had a better day, you will need some scissors, fabric adhesive, 1-inch fusible mesh tape, iron, and tape measure start. Measure the length of the window to determine the size of the fabric. Measure the width using the width of the blinds. You should cut the fabric about a foot longer and 3 inches wider than the finished shade.

T.calculate Considering how many slats you need to keep from the original blinds, keep one slat for every 6-8 inches of window length. Remove all but the necessary slats and place one slat every 6-8 inches, usually about 6-7. Then press 1 −Crease all four sides of the fabric with an iron. And attach your one strip –Fold the fusible webbing tape 1 inch, fold the edge over again, and press the crease with an iron to create a hem. Once the hem is complete, place the blind over the shade and measure every 6-8 inches to evenly distribute the slats of the blind to the surface of the fabric and attach them using fabric glue. Attach the top edge of the fabric to the top of the blind and the bottom edge to the bottom of the blind using adhesive. I can do it.

Here it is video tutorial To check before starting:

DIY Roman Shades from Blinds | With Heart

how to refusesew patterned curtains

To make patterned curtains, you can get them relatively cheap plain fabric and use stencil draw your own pattern When fabric paintTo make this type of curtain you will need mesh tape, scissors, a measuring tape and an iron. Measure your window opening and add 1 foot to the length and 1 foot to the width of each panel to fill it. You need to add 2 feet instead. Add a hem to his three sides of each panel using the method above. Then fold up and press 1 inch along the top edge, then fold down 2.5 inches and use fusible mesh tape to fuse the bottom edge of the fold to create a pocket for the curtain rod.

Once the panel is complete, you can use fabric paint and stencils to create patterns. When stenciling fabric, place a drop cloth, tarp, or disposable cardboard underneath to prevent bleeding onto the surface you are working on. upon.

how to make no-sew a ribbon curtain

To make a simple ribbon curtain, unconnected ribbon With your favorite color and craft or fabric glue. Measure the width and length of your window opening and add a few inches to the length and 6 inches to the width to calculate the amount of ribbon you will need.To calculate the number of strands you will need Divide the width of the curtain by the width of the ribbon. for example, if you have 30inch-Wide curtains, and you are doing two tasks –inch-For wide ribbons, 15 ribbons are required. Then, if your window is 30 inches high, you will need 15 strands of ribbon at either 30 inches or 450 inches of ribbon. About 11 yards of ribbon.

Once you have measured the strands of ribbon, you can cut them to length and fold the top end of each strand to make two.Inch the loop and glue the loop in place. Then thread the ribbon strands through the curtain rod and hang the new ribbon curtain.

3 easy ways to make your own no-sew window treatments

Source link 3 easy ways to make your own no-sew window treatments

Related Articles

Back to top button